Turbidity-discharge hysteresis in a meso-scale catchment: The importance of intermediate scale events     

Emma E. Lannergård  Jens Fölster  Martyn N. Futter 《水文研究》2021,35(12):e14435

In-situ sensors for riverine water quality monitoring are a powerful tool to describe temporal variations when efficient and informative analyses are applied to the large quantities of data collected. Concentration-discharge hysteresis patterns observed during storm events give insights into headwater catchment processes. However, the applicability of this approach to larger catchments is less well known. Here, we evaluate the potential for high-frequency turbidity-discharge (Q) hysteresis patterns to give insights into processes operating in a meso-scale (722 km²) northern mixed land use catchment. As existing event identification methods did not work, we developed a new, objective method based on hydrograph characteristics and identified 76 events for further analysis. Qualitative event analysis identified three recurring patterns. Events with low mean Q (≤ 2 m³/s) often showed short-term, quasi-periodic turbidity variation, to a large extent disconnected from Q variation. High max Q events (≥15 m³/s) were often associated with spring flood or snowmelt, and showed a disconnection between turbidity and Q. Intermediate Q events (mean Q: 2–11 m³/s) were the most informative when applying hysteresis indexes, since changes in turbidity and Q were actually connected. Hysteresis indexes could be calculated on a subset of 60 events, which showed heterogeneous responses: 38% had a clockwise response, 12% anticlockwise, 12% figure eight (clockwise–anticlockwise), 10% reverse figure eight (anticlockwise–clockwise) and 28% showed a complex response. Clockwise hysteresis responses were associated with the wetter winter and spring seasons. Generally, changes in Q and turbidity were small during anticlockwise hysteresis events. Precipitation often influenced figure-eight patterns, while complex patterns often occurred during summer low flows. Analysis of intermediate Q events can improve process understanding of meso-scale catchments and possibly aid in choosing appropriate management actions for targeting a specific observed pattern.  相似文献   

Radar Backscatter from Underdense Meteors and Diffusion Rates     

Werner Singer  Ralph Latteck  Luis Federico Millan  Nick J. Mitchell  Jens Fiedler 《Earth, Moon, and Planets》2008,102(1-4):403-409

Many meteoroids burn up between about 120 km and 70 km, deposit metals and dust and form ionized trails which are detected by radars. Model studies about the influence of neutral or positively charged background dust on the ambipolar diffusion indicate that significant smaller decay times should be observed for weak meteor echoes compared to strong meteor echoes which can affect the estimation of temperatures. The variation of meteor decay times in dependence on echo strength, height, and season was studied using radar observations at 69° N, 22° S, and 67° S. Significantly reduced decay times were found for weak echoes below about 88 km at low latitudes throughout the year, and at high latitudes with the exception of summer. In summer at high latitudes, decreasing decay times of weak and strong meteors are observed at altitudes below about 85 km during the appearance of noctilucent clouds. The impact of reduced decay times on the estimation of neutral temperatures from decay times is discussed.  相似文献   

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry     

Haosheng Wu  Roman Bttger  Frdric Couffignal  Jens Gutzmer  Joachim Krause  Frans Munnik  Axel D. Renno  Ren Hübner  Michael Wiedenbeck  Ren Ziegenrücker 《Geostandards and Geoanalytical Research》2019,43(4):531-541

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.  相似文献   

Multi-angle backscatter classification and sub-bottom profiling for improved seafloor characterization     

Evangelos Alevizos  Mirjam Snellen  Dick Simons  Kerstin Siemes  Jens Greinert 《Marine Geophysical Researches》2018,39(1-2):289-306

This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r²?>?0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings.  相似文献   

Introduction     

Gualtiero Badin  Jörn Behrens  Christian Franzke  Jens Rademacher 《地球物理与天体物理流体动力学》2019,113(5-6):425-427

  相似文献   

A Global Terrestrial Reference Frame from simulated VLBI and SLR data in view of GGOS     

Susanne Glaser  Rolf König  Dimitrios Ampatzidis  Tobias Nilsson  Robert Heinkelmann  Frank Flechtner  Harald Schuh 《Journal of Geodesy》2017,91(7):723-733

In this study, we assess the impact of two combination strategies, namely local ties (LT) and global ties (GT), on the datum realization of Global Terrestrial Reference Frames in view of the Global Geodetic Observing System requiring 1 mm-accuracy. Simulated Very Long Baseline Interferometry (VLBI) and Satellite Laser Ranging (SLR) data over a 7 year time span was used. The LT results show that the geodetic datum can be best transferred if the precision of the LT is at least 1 mm. Investigating different numbers of LT, the lack of co-located sites on the southern hemisphere is evidenced by differences of 9 mm in translation and rotation compared to the solution using all available LT. For the GT, the combination applying all Earth rotation parameters (ERP), such as pole coordinates and UT1-UTC, indicates that the rotation around the Z axis cannot be adequately transferred from VLBI to SLR within the combination. Applying exclusively the pole coordinates as GT, we show that the datum can be transferred with mm-accuracy within the combination. Furthermore, adding artificial stations in Tahiti and Nigeria to the current VLBI network results in an improvement in station positions by 13 and 12%, respectively, and in ERP by 17 and 11%, respectively. Extending to every day VLBI observations leads to 65% better ERP estimates compared to usual twice-weekly VLBI observations.  相似文献   

On the consistency of the current conventional EOP series and the celestial and terrestrial reference frames     

Santiago Belda  Robert Heinkelmann  José M. Ferrándiz  Tobias Nilsson  Harald Schuh 《Journal of Geodesy》2017,91(2):135-149

Precise transformation between the celestial reference frames (CRF) and terrestrial reference frames (TRF) is needed for many purposes in Earth and space sciences. According to the Global Geodetic Observing System (GGOS) recommendations, the accuracy of positions and stability of reference frames should reach 1 mm and 0.1 mm year\(^{-1}\), and thus, the Earth Orientation Parameters (EOP) should be estimated with similar accuracy. Different realizations of TRFs, based on the combination of solutions from four different space geodetic techniques, and CRFs, based on a single technique only (VLBI, Very Long Baseline Interferometry), might cause a slow degradation of the consistency among EOP, CRFs, and TRFs (e.g., because of differences in geometry, orientation and scale) and a misalignment of the current conventional EOP series, IERS 08 C04. We empirically assess the consistency among the conventional reference frames and EOP by analyzing the record of VLBI sessions since 1990 with varied settings to reflect the impact of changing frames or other processing strategies on the EOP estimates. Our tests show that the EOP estimates are insensitive to CRF changes, but sensitive to TRF variations and unmodeled geophysical signals at the GGOS level. The differences between the conventional IERS 08 C04 and other EOP series computed with distinct TRF settings exhibit biases and even non-negligible trends in the cases where no differential rotations should appear, e.g., a drift of about 20 \(\upmu \)as year\(^{-1 }\)in \(y_{\mathrm{pol }}\) when the VLBI-only frame VTRF2008 is used. Likewise, different strategies on station position modeling originate scatters larger than 150 \(\upmu \)as in the terrestrial pole coordinates.  相似文献   

The extension of the parametrization of the radio source coordinates in geodetic VLBI and its impact on the time series analysis     

Maria Karbon  Robert Heinkelmann  Julian Mora-Diaz  Minghui Xu  Tobias Nilsson  Harald Schuh 《Journal of Geodesy》2017,91(7):755-765

The radio sources within the most recent celestial reference frame (CRF) catalog ICRF2 are represented by a single, time-invariant coordinate pair. The datum sources were chosen mainly according to certain statistical properties of their position time series. Yet, such statistics are not applicable unconditionally, and also ambiguous. However, ignoring systematics in the source positions of the datum sources inevitably leads to a degradation of the quality of the frame and, therefore, also of the derived quantities such as the Earth orientation parameters. One possible approach to overcome these deficiencies is to extend the parametrization of the source positions, similarly to what is done for the station positions. We decided to use the multivariate adaptive regression splines algorithm to parametrize the source coordinates. It allows a great deal of automation, by combining recursive partitioning and spline fitting in an optimal way. The algorithm finds the ideal knot positions for the splines and, thus, the best number of polynomial pieces to fit the data autonomously. With that we can correct the ICRF2 a priori coordinates for our analysis and eliminate the systematics in the position estimates. This allows us to introduce also special handling sources into the datum definition, leading to on average 30 % more sources in the datum. We find that not only the CPO can be improved by more than 10 % due to the improved geometry, but also the station positions, especially in the early years of VLBI, can benefit greatly.  相似文献   

Geographic Patterns of Craft Breweries at the Intraurban Scale     

Isabelle Nilsson  Neil Reid  Matthew Lehnert 《The Professional geographer》2018,70(1):114-125

This article examines the intraurban geography of craft breweries in ten cities across the United States. First, through an exhaustive literature review, we outline both supply- and demand-side factors that might cause craft breweries to cluster. Second, we empirically test whether these establishments tend to cluster within cities using spatial statistical techniques. Many communities are attempting to support the establishment of more craft breweries as a way to boost tourism and economic development. The findings from this article aid in this discussion by providing insights into how craft brewers locate and the factors that could influence their location decision behavior. Our findings suggest that craft brewers do in fact cluster. There are both supply and demand factors responsible. On the supply side, the collaborative environment within the industry and the artisan nature of the industry's products allows for benefits of clustering to outweigh the costs associated with this behavior. On the demand side, the emergence of “brewery districts” allows individual brewers to enjoy the reputation benefits associated with the district in terms of increased foot traffic from locals and visitors looking to sample a variety of beers.  相似文献   

Correction of Discretization Errors Simulated at Supply Wells          下载免费PDF全文

Gordon J. MacMillan  Jens Schumacher 《Ground water》2015,53(4):651-657

Many hydrogeology problems require predictions of hydraulic heads in a supply well. In most cases, the regional hydraulic response to groundwater withdrawal is best approximated using a numerical model; however, simulated hydraulic heads at supply wells are subject to errors associated with model discretization and well loss. An approach for correcting the simulated head at a pumping node is described here. The approach corrects for errors associated with model discretization and can incorporate the user's knowledge of well loss. The approach is model independent, can be applied to finite difference or finite element models, and allows the numerical model to remain somewhat coarsely discretized and therefore numerically efficient. Because the correction is implemented external to the numerical model, one important benefit of this approach is that a response matrix, reduced model approach can be supported even when nonlinear well loss is considered.  相似文献